Note: This is an historic document. We are no longer maintaining the content, but it may have value for research purposes. Pages linked to from the document may no longer be available.
Securing Your Web BrowserWill Dormann and Jason Rafail
This paper will help you configure your web browser for safer internet surfing. It is written for home computer users, students, small business workers, and any other person who works with limited Information Technology (IT) support and broadband (cable modem, DSL) or dial-up connectivity. Although the information in this document may be applicable to users with formal IT support as well, organizational IT policies should supersede these recommendations. If you are responsible for IT policies for your organization, please consider implementing these recommendations as part of your policy.
Document revision history
Ideally, computer users should evaluate the risks from the software they use. Many computers are sold with software already loaded. Whether installed by a computer manufacturer, operating system maker, Internet Service Provider, or by a retail store, the first step in assessing the vulnerability of your computer is to find out what software is installed and how one program will interact with another. Unfortunately, it is not practical for most people to perform this level of analysis.
There is an increasing threat from software attacks that take advantage of vulnerable web browsers. We have observed a trend whereby new software vulnerabilities are exploited and directed at web browsers through use of compromised or malicious web sites. This problem is made worse by a number of factors, including the following:
In addition to following this paper's recommendations, refer to the documentation in the References section for other steps you can take to secure your system.
Attackers focus on exploiting client-side systems (your computer) through various vulnerabilities. They use these vulnerabilities to take control of your computer, steal your information, destroy your files, and use your computer to attack other computers. A low-cost way attackers do this is by exploiting vulnerabilities in web browsers. An attacker can create a malicious web page that will install Trojan software or spyware that will steal your information. Additional information about spyware is available in the following document: http://www.cert.org/archive/pdf/spyware2005.pdf. Rather than actively targeting and attacking vulnerable systems, a malicious web site can passively compromise systems as the site is visited. A malicious HTML document can also be emailed to victims. In these cases, the act of opening the email or attachment can compromise the system.
Some specific web browser features and associated risks are briefly described below. Understanding what different features do will help you understand how they affect your web browser's functionality and the security of your computer.
ActiveX is a technology used by Microsoft Internet Explorer on Microsoft Windows systems. ActiveX allows applications or parts of applications to be utilized by the web browser. A web page can use ActiveX components that may already reside on a Windows system, or a site may provide the component as a downloadable object. This gives extra functionality to traditional web browsing, but may also introduce more severe vulnerabilities if not properly implemented.
ActiveX has been plagued with various vulnerabilities and implementation issues. One problem with using ActiveX in a web browser is that it greatly increases the attack surface, or “attackability,” of a system. Installing any Windows application introduces the possibility of new ActiveX controls being installed. Vulnerabilities in ActiveX objects may be exploited via Internet Explorer, even if the object was never designed to be used in a web browser (VU#680526). In 2000, the CERT/CC held a workshop to analyze security in ActiveX. The results from that workshop may be viewed at http://www.cert.org/reports/activeX_report.pdf. Many vulnerabilities with respect to ActiveX controls lead to severe impacts. Often an attacker can take control of the computer. You can search the Vulnerability Notes Database for ActiveX vulnerabilities at http://www.kb.cert.org/vuls/byid?searchview&query=activex.
Java is an object-oriented programming language that can be used to develop active content for web sites. A Java Virtual Machine, or JVM, is used to execute the Java code, or “applet,” provided by the web site. Some operating systems come with a JVM, while others require a JVM to be installed before Java can be used. Java applets are operating system independent.
Java applets usually execute within a “sandbox” where the interaction with the rest of the system is limited. However, various implementations of the JVM contain vulnerabilities that allow an applet to bypass these restrictions. Signed Java applets can also bypass sandbox restrictions, but they generally prompt the user before they can execute. You can search the Vulnerability Notes Database for Java vulnerabilities at http://www.kb.cert.org/vuls/byid?searchview&query=java.
Plug-ins are applications intended for use in the web browser. Netscape has developed the NPAPI standard for developing plug-ins, but this standard is used by multiple web browsers, including Mozilla Firefox and Safari. Plug-ins are similar to ActiveX controls but cannot be executed outside of a web browser. Adobe Flash is an example of an application that is available as a plug-in.
Plug-ins can contain programming flaws such as buffer overflows, or they may contain design flaws such as cross-domain violations, which arises when the same origin policy is not followed.
Cookies are files placed on your system to store data for specific web sites. A cookie can contain any information that a web site is designed to place in it. Cookies may contain information about the sites you visited, or may even contain credentials for accessing the site. Cookies are designed to be readable only by the web site that created the cookie. Session cookies are cleared when the browser is closed, and persistent cookies will remain on the computer until the specified expiration date is reached.
This section shows you how to securely configure a few of the most popular web browsers and how to disable features that can cause vulnerabilities. We encourage you to visit the vendor's web site for the browser you use to learn more. If a vendor does not provide documentation on how to secure the browser, we encourage you to contact them and request more information.
Multiple web browsers may be installed on your computer. Other software applications on your computer, such as email clients or document viewers, may use a different browser than the one you normally use to access the web. Also, certain file types may be configured to open with a different web browser. Using one web browser for manually interacting with web sites does not mean other applications will automatically use the same browser. For this reason, it is important to securely configure each web browser that may be installed on your computer. One advantage to having multiple web browsers is that one browser can be used for only sensitive activities such as online banking, and the other can be used for general purpose web browsing. This can minimize the chances that a vulnerability in a web browser, web site, or related software can be used to compromise sensitive information.
Web browsers are frequently updated. Depending on the version of your software, the features and options may move or change.
Microsoft Internet Explorer (IE) is a web browser integrated into the Microsoft Windows operating system. Removal of this application is not practical.
In addition to supporting Java, scripting and other forms of active content, Internet Explorer implements ActiveX technology. While any application is potentially vulnerable to attack, it is possible to mitigate a number of serious vulnerabilities by using a web browser that does not support ActiveX controls. However, using an alternate browser may affect the functionality of some sites that require the use of ActiveX controls. Note that using a different web browser will not remove IE, or other Windows components from the system. Other software, such as email clients, may use IE, the WebBrowser ActiveX control (WebOC), or the IE HTML rendering engine (MSHTML). Results from the CERT/CC ActiveX workshop in 2000 are available at http://www.cert.org/reports/activeX_report.pdf.
Here are steps to disable various features in Internet Explorer 7. Note that menu options may vary between versions of IE, so you should adapt the steps below as appropriate.
In order to change settings for Internet Explorer, select Tools then Internet Options…
Select the Security tab. On this tab you will find a section at the top that lists the various security zones that Internet Explorer uses. More information about Internet Explorer security zones is available in the Microsoft document Setting Up Security Zones. For each of these zones, you can select a Custom Level of protection. By clicking the Custom Level button, you will see a second window open that permits you to select various security settings for that zone. The Internet zone is where all sites initially start out. The security settings for this zone apply to all the web sites that are not listed in the other security zones. We recommend the High security setting be applied for this zone. By selecting the High security setting, several features including ActiveX, Active scripting, and Java will be disabled. With these features disabled, the browser will be more secure. Click the Default Level button and then drag the slider control up to High.
For a more fine-grained control over what features are allowed in the zone, click the Custom Level button. Here you can control the specific security options that apply to the current zone. For example ActiveX can be disabled by selecting Disable for Run ActiveX controls and plug-ins. Default values for the High security setting can be selected by choosing High and clicking the Reset button to apply the changes.
The Trusted sites zone is a security zone for sites that you think are safe to visit. You believe that the site is designed with security in mind and that it can be trusted not to contain malicious content. To add or remove sites from this zone, you can click the Sites… button. This will open a secondary window listing the sites that you trust and permitting you to add or remove them. You may also require that only verified sites (HTTPS) can be included in this zone. This gives you greater assurance that the site you are visiting is the site that it claims to be.
We recommend setting the security level for the Trusted sites zone to Medium-high (or Medium for Internet Explorer 6 and earlier). When the Internet Zone is set to High, you may encounter web sites that do not function properly due to one or more of the associated security settings. This is where the Trusted sites zone can help. If you trust that the site will not contain malicious content, you can add it to the list of sites in the Trusted sites zone. Once a site is added to this zone, features such as ActiveX and Active scripting will be enabled for the site. The benefit of this type of configuration is that IE will be more secure by default, and sites can be “whitelisted” in the Trusted sites zone to gain extra functionality.
The Privacy tab contains settings for cookies. Cookies are text files placed on your computer by various sites that you visit either directly (first-party) or indirectly (third-party) through ad banners, for example. A cookie can contain any data that a site wishes to store. It is often used to track your computer as you move through a web site and store information such as preferences or credentials. We recommend that you select the Advanced button and select Override automatic cookie handling. Then select Prompt for both first and third-party cookies. This will prompt you each time a site tries to place a cookie on your machine. If the number of cookie prompts is too excessive, the option to Always allow session cookies can be enabled. This will allow non-persistent cookies to be accepted without user interaction. Session cookies have less risk than persistent cookies.
You can then evaluate the originating site, whether you wish to accept or deny the cookie, and what action to take (allow or block, with the option to remember the decision for all future cookies from that web site). For example, if visiting a web site causes a cookie prompt from a web domain that is associated with advertising, you may wish to click Block Cookie to prevent that domain from being able to set cookies on your computer, for privacy reasons.
By selecting the Sites... button, you can manage the cookie settings for specific sites. You can add or remove sites, and you can change the current settings for existing sites. The bottom section of this window will specify the domain of the site and the action to take when that site wants to place a cookie on your machine. You can use the upper section of this window to change these settings.
Alternatively, if you do not wish to receive warning dialogs when a site attempts to set a cookie, you can use Internet Explorer's pre-set privacy rules. Click the Default button and then drag the slider up to High. Note that some web sites may fail to function properly with the High setting. In such cases, you may add the site to the list of sites for which cookies are allowed, as described above.
The Advanced tab contains settings that apply to all of the security zones. We recommend that you disable the Enable third-party browser extensions option. This option includes tool bars and Browser Helper Objects (BHOs). While some add-ons can be useful, they also have the ability to violate your privacy. For example, a browser add-on may monitor your web browsing habits, or even change the contents of web pages in an attempt to gather personal information.
Internationalized Domain Names (IDN) can be abused to allow spoofing of web page addresses. This can allow phishing attacks to be more convincing. More details about IDN spoofing can be found in Vulnerability Note VU#273262. To protect against IDN spoofing in Internet Explorer, enable the Always show encoded addresses option. This will cause IDN addresses to be displayed in an encoded form in the Internet Explorer address bar and status bar, which will remove the visual similarity to the spoofing target address.
We also recommend that you disable the Play sounds in webpages option. Sounds in web pages are rarely integral to web page content, and may also introduce security risks by having the browser process additional untrusted data. This option is for Internet Explorer's ability to natively handle sounds. It will not interfere with other software, such as Adobe Flash or Apple QuickTime.
Under the Programs tab, you can specify your default applications for viewing web sites, email messages and various other network related tasks. You can also disable Internet Explorer from asking you if you would like it to be your default web browser here.
CAPS), which is similar to Internet Explorer's Security Zone model, however there is no graphical user interface for setting these options. We recommend looking in the Help, For Internet Explorer Users menu to help users understand how terminology differs between the two applications.
The following are some steps to disable various features in Mozilla Firefox. Note that some menu options may change between versions or may appear in different locations depending on the host operating system. You should adapt the steps below as appropriate.
To edit the settings for Mozilla Firefox, select Tools, then Options.
You will then see an Options window that has a Category row at the top and the features for that category below. The first category of interest is the General category. Under this section, you can set Firefox as your default browser. Also select the option Always ask me where to save files. This will make it more obvious when a web page attempts to save a file to your computer.
Under the Privacy category, you will find options for browser History and Cookies. In the History section, disable the option to Remember what I enter in forms and the search bar. If the browser remembers these options, it can be a privacy violation, especially if the browser is used in a shared environment. Visited page and download history can be disabled here too.
In the Cookie section, select ask me every time. This will help make it clear when a web site is attempting to set a cookie.
When the user is prompted, the contents of the cookie can be viewed and the user can select whether to Deny, Allow for Session, or Allow the cookie. This gives the user more information about what sites are using cookies and also gives more granular control of cookies as opposed to globally enabling them. Select Use my choice for all cookies from this site to have the browser remember your decision so that you will not be prompted each time you return to the site. Clicking the Allow for Session button will cause the cookie to be cleared when the browser is restarted. If prompting for each cookie is too excessive, the user may wish to select the Keep until: I close Firefox option. This will prevent web sites from being able to set persistent cookies.
Many web browsers will offer the ability to store login information. In general, we recommend against using such features. Should you decide to use the feature, ensure that you use the measures available to protect the password data on your computer. Under the Security category, the Passwords section contains various options to manage stored passwords, and a Master Password feature to encrypt the data on your system. We encourage you to use this option if you decide to let Mozilla Firefox manage your passwords.
The Warn me when sites try to install add-ons option will display a warning bar at the top of the browser when a web site attempts to take such an action.
The Content category contains an option to Enable Java. Java is a programming language that permits web site designers to run applications on your computer. We recommend disabling this feature unless required by the trusted site you wish to visit. Again, you should determine if this site is trustworthy and whether you want to enable Java to view the site’s content. After you are finished visiting the site, we recommend disabling Java until needed again.
The Content section has an option to modify actions taken when files are downloaded. Any time a file type is configured to automatically open with an associated application, this can make the browser more dangerous to use. Vulnerabilities in these associated applications can be exploited more easily when they are configured to automatically open. Click the Manage button to view the current download settings and modify them if necessary.
The Download Actions dialog will show the file types and the currently configured actions to take when the browser encounters such a file. For all listed file types, either select Remove Action or Change Action... to modify the action to save the file to the computer. This increases the amount of user action required to launch the associated applications, and will therefore help prevent automated exploitation of vulnerabilities that may exist in these applications.
Firefox 1.5 and later include a feature to Clear Private Data. This option will remove potentially sensitive information from the web browser. Select Clear Private Data... from the Tools menu to use this privacy feature.
Because many web browser vulnerabilities require scripting, configuring the browser to have scripting disabled by default greatly reduces the chances of exploitation. To extend this protection even further, NoScript can be configured to also block Java, Flash, and other plug-ins by default. This can help to mitigate any vulnerabilities in these plug-in technologies. NoScript will replace these elements with a placeholder icon, which can be clicked to enable the element. Click the NoScript icon and then click Options... to get to the NoScript configuration screen.
On the Plugins tab, select the options as follows:
Aside from visiting web sites that are inherently malicious, users can also be put at risk when a legitimate, trusted site is compromised. For this reason, we recommend enabling the option to Apply these restrictions to trusted sites too. If this option is too intrusive, it can be turned off at the cost of increased risk.
In order to change settings for Safari, select Safari then Preferences…
Note that on the Safari menu, you can also select the option “Block Pop-up Windows”. This option will prevent sites from opening another window through the use of scripting or active content. Be aware that while Pop-up Windows are often associated with advertisements, some sites may attempt to display relevant content in a new window. Therefore, setting this option may disable the functionality of some sites.
Once you select the Preferences menu, the window below will open. The first tab to look at is the General tab. On this tab you can set up many options such as Save downloaded files to: and Open “safe” files after downloading. We recommend that you download files to a folder that you create for that purpose. We also recommend that you deselect the Open “safe” files after downloading option.
The next section of interest is the AutoFill tab. On this tab, you can select what types of forms your browser will fill in automatically. In general, we recommend against using AutoFill features. If someone can gain access to your machine, or the AutoFill data files, then the AutoFill feature may allow them to use the stored credentials to access to other sites that they would not otherwise have the ability to access. However, if used with appropriate protective measures, it may be acceptable to enable AutoFill. We recommend using filesystem encryption software such as OS X FileVault along with the Use secure virtual memory option to provide additional security for files that reside in a user's home directory.
The Security tab provides several options. The Web Content section permits you to enable or disable various forms of scripting and active content. We recommend disabling the first three options in this section, and only enabling them based on site-specific cases. We recommend selecting the Block Pop-up Windows option. Remember that this option will prevent sites from opening another window through the use of scripting, or active content. Again, be aware that while Pop-up Windows are often associated with advertisements, some sites may attempt to display relevant content in a new window. Therefore, setting this option may disable the functionality of some sites.
In this dialog you can disable cookies and also view or remove cookies that have been set. In general we recommend disabling cookies, and enabling them only when you visit a site that requires their use. At this point, you should determine if the site is trustworthy and whether you want to enable cookies to view the site’s content. After you are finished visiting the site, we recommend disabling cookies until needed again. You can choose to only accept cookies from the sites that visit by selecting the Only from sites you navigate to option. This will permit sites that you visit to set cookies, but not third-party sites. Finally, we recommend selecting the Ask before sending a non-secure form to a secure website option. This will prompt you before sending unencrypted form data when viewing an HTTPS-secured web site.
Opera - http://www.opera.com/support/tutorials/security
Mozilla SeaMonkey - http://www.mozilla.org/projects/seamonkey
Konqueror - http://www.konqueror.org
Netscape - http://browser.netscape.com
Note that official support for Netscape has ended on February 1st, 2008. If you are using Netscape, we strongly recommend switching to a browser that is still supported.
Follow the principle of least privilege — don't enable it if you don't need itConsider creating and using an account with limited privileges instead of an 'administrator' or 'root' level account for everyday tasks. Depending on the operating system, you only need to use administrator level access when installing new software, changing system configurations, etc. Many vulnerability exploits (e.g., viruses, Trojan horses) are executed with the privileges of the user that runs them — making it far more risky to be logged in as an administrator all the time.
January 23, 2006 Inital Release
February 14, 2008 Updated Internet Explorer and Firefox guidelines